|Item Weight||3.5 pounds|
|Product Dimensions||8.3 x 3.6 x 1.4 inches|
|Batteries||1 Lithium Polymer batteries required. (included)|
|Manufacturer Part Number||Autel MD806 Pro|
【What’s the Difference? The Upgraded Version of Autel MD806/MD808】
The new-released Autel MD806 PRO, as the advanced version of MD806, is the powerful diagnostic tool that provides full system diagnoses for basic diagnoses and services for all available modules on the vehicle.
Autel MD806/MD808 is designed with only four systems diagnoses support for the engine, transmission, ABS and SRS.
【ALL System Diagnoses – Guide Directly to the Fix and Eliminate Guesswork】
The professional-level vehicle diagnostic device MD806 PRO is a full system diagnostic scanner that can quickly establish a data link to the electronic control units of the vehicle being serviced directly. It allows you to:
- Retrieve ECU information of tested control units including unit type, version numbers, and other specifications;
- Read & erase DTCs to locate problem areas and clear the codes easily;
- View live data of each parameter item;
- Get access to all vehicle systems and subsystems, such as Engine; Automatic Transmission; ABS/EPB/SRS Airbag/Oil; Suspension; Audio; IMMO Immobilizer; Air Conditioning; DPF; Auto Headlamp; ACC; Car Radio Audio; Car Door Windows etc. to perform a comprehensive scanning process on ECUs to locate the faulty systems and retrieve the DTCs related.
Which only costs you a few minutes to finish the full scanning with just one click of a button.
You will be able to diagnose the car and turn off the Check Engine Light, and know what the problem is any time your car breaks down, which will help you determine whether it needs immediate attention, and how much you should expect to spend on repairs.
【FIVE Special Features – Promptly Reminded and Eliminate Hidden Dangers】
With the professional diagnostic device MD806 PRO, you can learn to perform complex diagnostic functions, which will give you a lot more power over the ins and outs of your car to figure out what is going on with your modern computerized vehicle, so that you can get it fixed and get back on the road.
- Oil Reset for Engine Efficiency
The MD806 PRO scanner offers help to reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate. Your driving safety also gets ensuring.
- Electronic Parking Brake (EPB) Release for Safety
When the electronic parking brake cannot be released, the electronic parking brake system may malfunction. Driving in such conditions may cause an unexpected accident. MD806 PRO is fitted with the function of Electronic Parking Brake (EPB) Release in case of the emergency, or to help you calibrate the parking brake after you make some changes on the EPB system.
- Steering Angle Sensor (SAS) Calibration
The failure of the SAS system can cause a dragging effect on the tires and may cause the vehicle to veer off the road. Luckily, this Autel scanner MD806 PRO can effectively perform SAS calibration (set the SAS angle to zero) and turn off the SAR error light on most vehicles after you have undertaken wheel alignment or replaced the stability control components of your car which may lead to the SAS light popping up on the dashboard.
- Diesel Particulate Filter (DPF) Service
The DPF function allows you to carry out numerous functions on the Diesel Particulate Filter system without having to send your car to the main dealer. The tool will manage DPF regeneration, DPF component replacement teach-in, and DPF teach-in after replacing the engine control unit. You can perform the DPF cleaning to clear the blockage through the continuous burning of the particulates captured in the DPF filter. And when a DPF regeneration cycle is completed, the DPF light automatically goes off.
- BMS (Battery Management System) Service
The scan tool can evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, activate the rest state of the vehicle, and charge the battery via the diagnostic socket. It ensures that the battery runs as required and warns you of imminent failures or damage. Moreover, it optimizes the functionality of the battery for the smooth running of your vehicle.
【FULL Modes of OBDII – Get Quick Access to Functional Tests and Resets】
Besides all the functions listed above, this scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
$01 – Request Current Powertrain Diagnostic Data
$02 – Request Powertrain Freeze Frame Data
$03 – Request Emission-Related Diagnostic Trouble Codes
$04 – Clear/Reset Emission-Related Diagnostic Information
$05 – Request Oxygen Sensor Monitoring Test Results
$06 – Request On-Board Monitoring Test Results for Specific Monitored Systems
$07 – Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle
$08 – Request Control of On-Board System Test or Component
$09 – Request Vehicle Information
$0A – Request Emission-Related Diagnostic Trouble Codes with Permanent Status
【DTC Lookup Library – Pin Down the Exact Cause of the Car Trouble】
One of the best things about using the Autel MD806 PRO as an engine diagnostic tool is that it has a lookup library, which will define the codes for simplifying the analysis and repair process. It does give you the details of the code so you don’t have to search online to find out what’s the reason for this code to appear. And also you can simply click on the error code that you selected. Then, you will get an in-depth explanation of the meaning of the error code.
【Playback and Print Data – A Simple Solution for Complex Diagnostic Issues】
This scanner allows you to view data from the last test recorded. Moreover, you’ll be able to print data via the PC. The reason why this point is being emphasized is that there might arise certain problems that would be beyond your level of understanding. So if you would like to make your mechanic understand the current problem at hand, then you would have to explain it in detail. And rather than taking the additional hassle and confusing things, you would easily be able to print and hand the diagnostics report to your technician. They would take a look at the whole thing and would then understand what would need to be done.
【Multilingual Support of 14 Languages】
The OBD2 scanner has the interface covering several universal languages:
English, Traditional Chinese, French, German, Spanish, Portuguese, Dutch, Polish, Swedish, Korean, Japanese, Russian, Italian, Greek, Simplified Chinese.
The mechanic needs no effort in trying to get translations as far as the code meanings and repair formulas are concerned.
12-month warranty for any possible quality problems.
Welcome to get technical support via email/Q&A, or hotline on our official site, if you are unsure whether the tool is suitable for your device, or any questions.
Processor: ARM ® Thumb ® Processor running at up to 400 MHz
Memory: 32MB, 166 MHz
Display: 4.0 inch LCD with 800×480 resolutions
Connectivity: Mini USB: 2.0, Micro SD Card (16GB)
Power Consumption: 1.7 W
Operating Temperature: -10°C to 60°C (14°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Operating Humidity: 5% – 95% non-condensing
Housing: Strong plastic housing with protective rubber boot
Dimensions: 202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
Weight: 313 g (0.69 lb.)
1*OBD II Cable
1*Micro SD Card